The use of angle grinders requires the use of diamond saw blades. First of all, you need to understand the principles of using angle grinders and saw blades, and then use the tools in the most appropriate way.
Let's cover the basics of what an angle grinder is and how to use it.
The angle grinder has a wide range of uses. It can be used for cutting work in some simple architectural renovation projects, and it can also meet the daily cutting work of some household DIY enthusiasts.
The simple definition of an angle grinder is a hand-held power tool with a rotating grinding disc used for cutting, grinding and polishing some hard materials.
When choosing an angle grinder, you need to pay attention to its size, which refers to the size of the diamond saw blade it can accommodate. For example, a small diameter saw blade (below 180mm) can be used with a standard size angle grinder. But to use a saw blade with a large diameter such as (180mm-230mm), you need to choose an angle grinder that is higher than the standard size.
An angle grinder can not only be used for cutting various hard materials, it can also be used for grinding and polishing. What product you choose will determine what you do with your angle grinder, choose a diamond saw blade, which can be used to cut a variety of materials.
How to install the diamond saw blade on the angle grinder?
1. You must check to make sure the angle grinder is not connected to the power supply before installation.
2. Some customers may have angle grinder tools that have been placed for a period of time, or are newly purchased tools. You need to check that the protective device on the angle grinder and the handle are not lost, and the wires on the angle grinder are not worn.
3. Check that the diamond saw blade is intact and not damaged.
4. Turn the arbor nut with a wrench to remove it.
5. Put the diamond saw blade in the angle grinder and install it in the direction indicated on the angle grinder and saw blade.
6. Tighten the diamond saw blade and arbor nut.
Use an angle grinder in a safe manner. It is very necessary to take safety precautions when using an angle grinder.
The following three points need special attention during use:
1. The diamond saw blade is installed at a right angle, and the cutting process will produce debris that requires dust and cutting materials, so please always wear safety glasses and a face shield to protect your eyes.
2. When cutting, due to the friction between the diamond saw blade on the angle grinder and the material to be cut, small sparks may be generated, so you need to wear safety gloves to protect yourself.
3. There may be some noise during the cutting process, and it is necessary to wear hearing protection devices to isolate noise pollution to the greatest extent. If you are working in some construction sites or other more dangerous environments, you also need to wear a hard hat to protect your head, and don't forget to wear safety shoes.
4. Due to the vibration during the cutting process, in order to avoid the accidental drop of the tool due to one-handed operation, it will pose a threat to the safety of the operator. Therefore, when cutting with an angle grinder, the operator needs to use both hands to control the tool.
5. There is a self-contained saw blade guard on the angle grinder. For the safety of the operator, please do not remove the guard privately. It can effectively prevent the debris generated during the cutting process from flying around.
The angle grinder is an efficient tool for cutting, grinding, and polishing. Different grinding discs can be installed on the angle grinder, but why choose a diamond saw blade?
The segment of the diamond saw blade is made of high-quality diamond particles, which are hard and can cut many different types of materials.
Message Board -
