This diamond saw blade is designed for Dekton cutting, fast and smooth cutting, long lifespan.
Dekton blade has narrow U slots, it also has good sharpness and high efficiency during working. At the same time, it has the better cutting result: slippy cutting, flat surface, and even size. Stable cutting, narrow cutting gap, stone waste reduction.
This diamond cutting blade will be your best choice during Dekton cutting.
Diameter range from 250-600mm, segment height: 10mm, Arbor: 60/50mm.
Description
The Corediam SDBA is a silver-brazed diamond blade with narrow U-slots, made for wet cutting Dekton on bridge saws and compatible stone saws. We built it for slab sizing and for fabrication work where edge condition matters, such as countertops and wall panels. It is also used for wet cutting porcelain and ceramic slabs.
Diameters: 250, 300, 350, 400, 450, 500 and 600 mm (10″ to 24″)
Segment height: 10 mm on every model
Standard bore: 60 mm, with other bores available on request
Construction: silver brazed segments with narrow U-slots
Cutting condition: wet cutting only
Supply: OEM branding, samples within two weeks, export to more than 50 countries
Dekton diamond blade for clean and less chipping cut with bridge saw
| Item No. | Diameter | Segment Height | Segment Thickness | Arbor |
| SDBA250 | 250mm | 10mm | 3.0mm | 60mm |
| SDBA300 | 300mm | 10mm | 3.2mm | 60mm |
| SDBA350 | 350mm | 10mm | 3.2mm | 60mm |
| SDBA400 | 400mm | 10mm | 3.4mm | 60mm |
| SDBA450 | 450mm | 10mm | 3.4mm | 60mm |
| SDBA500 | 500mm | 10mm | 3.6mm | 60mm |
| SDBA600 | 600mm | 10mm | 4.0mm | 60mm |
Features
1. Manufacturer technology: Silver brazed
2. Advantage:
• It has good sharpness and high efficiency in the process of cutting, the segments are not easy to fall off during work.
• Narrow cutting gap, stone waste reduction.
• Clean cuts and no chipping.
3. Suitable: wet cutting
4. Equipment: Stone saw,Bridge saw
The standard SDBA400 has a 400 mm diameter, a 60 mm bore and 3.4 mm thick segments. For a custom 400 mm Dekton cutting blade, use SDBA400 as the reference and identify exactly what you need changed.
Replacing an existing blade. Send the current model or label, outside diameter, bore and any mounting drawing. Two blades with the same outside diameter can have different bores or mounting requirements.
Changing blade diameter. Check the diameters and cutting depth supported by your saw for the slab thickness and cut angle. Supply the spindle speed so the selected blade’s operating limits can be checked against the machine specifications.
Requesting a nonstandard specification. List the requested bore, diameter or segment dimensions and attach a drawing if available. Corediam can review feasibility and confirm the specification, sample requirements and lead time for the requested configuration.
Silver brazing joins the diamond segments to the steel core with silver solder. The narrow U-slots between segments are there to help with edge condition and to let water reach the cut. The narrow kerf also removes less slab material per cut. Because this construction is intended for wet use, always cut with plenty of water directed into the cut.
| Segment attachment | How it is made | Typical use |
|---|---|---|
| Silver brazed (SDBA) | Segments are brazed to the steel core with silver solder. | Wet cutting of stone and slab materials on bridge saws. Not for dry cutting. |
| Laser welded | Segments are joined to the core by laser welding. | Widely used for concrete and asphalt cutting, including dry work. |
| Sintered | The rim is formed by sintering and is common on tile and ceramic blades. | Tile, ceramic and some slab blades, in continuous rim and segmented types. |
Follow the saw, slab and blade manufacturers' instructions first. These practices are common to good Dekton fabrication:
Support the slab fully. Cut on a flat, supported surface. Vibration is a main cause of chipped edges.
Use plenty of water. Point the water right into the cut and keep it flowing for the whole cut. SDBA is for wet cutting only.
Feed slower than for granite. Ultra-compact slabs need a steady, slower feed. Slow down again at the entry and exit of the cut and during miter cuts.
Start the cut from outside the slab. Avoid plunge cuts, and do not pull the blade back through the cut.
Check for tension strips. Some slabs have them at the perimeter. Remove them before you cut, as the slab maker advises.
Run a test cut on scrap. Colors and thicknesses behave differently, so test every new slab type.
Inspect the blade. Check for cracks, missing segments and vibration before every shift. Stop at once if the blade runs rough.
| What you see | Common causes | What to check |
|---|---|---|
| Chips at the exit of the cut | Feed too fast at the exit, or the slab is unsupported where the blade leaves it. | Slow the feed near the exit and support the slab on both sides of the cut line. |
| Chips along the top edge | Worn or glazed blade, feed too fast, or not enough water. | Blade condition, water flow at the cut, and feed rate against the manufacturer's advice. |
| Wavy cut or vibration | Loose flanges, wrong bore or reducing ring, spindle runout, or an unsupported slab. | Bore fit, flange seating and spindle runout before you cut again. |
| Chipped miter face | Feed too fast for an angled cut, or the saw angle is not exactly 45°. | Verify the angle, slow the feed and cut a test pair before the job. |
| Slab cracks during the cut | Interrupted water flow, tension strips left in, or the slab shifts on its support. | Continuous water supply, slab edges and support under the whole piece. |
For broader fabrication guidance, see our Dekton cutting guide.
These series share several published sizes. Specify the series code as well as the diameter and bore so the quote identifies the blade construction you need.
| Series | Which requirement to put on your RFQ |
|---|---|
| SDBA | Specify SDBA when you are replacing this model or need its silver-brazed, narrow U-slot configuration for wet slab cutting. |
| SDBC | Specify the silent blade series when your purchase calls for that construction. Include any noise-related acceptance criteria. |
| SDBD | Specify the ultra-thin silent steel core when that construction is required. Ask for the core dimensions for your chosen model if they affect your process. |
For an assortment that covers several cutting requirements, browse the full Dekton cutting blade range.
Manufacturer. Corediam Tools designs and manufactures diamond tools for construction, stone and DIY markets, with more than 20 years in the industry.
Export experience. We supply customers in more than 50 countries, so we know different saw makes, bore sizes and market requirements.
OEM and branding. We support OEM branding, labels and packaging.
Fast response. We aim to reply within 8 hours.
Documents. We hold more than 10 certificates and patents. Tell us which documents your project needs.
Application
Wet cutting dekton,porcelain and ceramic materials
Cutting Test:
| Cutting materials | Cutting equipment | Cutting conditions | Cutting speed | Lifespan |
| Marble | Bridge saw | Wet cutting | 2-2.5m/min | 600-700m |
Test Results:
Fast & stable cutting | minimum chipping and good edge

Brazed marble blade production process
Raw material→ powder mixing → Steel core process → cold press → segment sintering → welding → surface treatment → package → dispatch

Delivery time
Delivery time depends on the order quantity and customization requirements.
Generally, production can be completed in 30-35 days.
For sample test, we can finish preparation within 2 weeks
Our leading time will be about 2-3 weeks for the batch order.
SDBA is a silver-brazed diamond blade with narrow U-slots for wet cutting Dekton, porcelain and ceramic slabs on bridge saws and stone saws. It is available from 250 to 600 mm with a 10 mm segment height.
No. SDBA is designed for wet cutting only. Dry cutting can overheat the segments and the core, which is a safety risk. Use plenty of water on every cut.
The published SDBA400 specification lists a 60 mm bore. For a 50 mm bore, send your saw model and mounting dimensions and we will confirm availability and how the blade will be supplied.
SDBA350 is 14″, SDBA400 is 16″, SDBA450 is 18″, SDBA500 is 20″ and SDBA600 is 24″. SDBA250 and SDBA300 are 10″ and 12″.
Choose the diameter your saw is built for and check the cutting depth for your slab thickness and cut angle. Send us the saw model and spindle rpm if you are unsure, and we will help match the blade to the machine.
Request a sample and cut your actual material, thickness and cut type. Compare visible chips, cut accuracy and finishing allowance against your current blade under equivalent conditions. For miter work, include a joint fit check on the trial pieces.
Tell us the cut angle, slab thickness and saw model when you request a sample, and we will confirm the suitable configuration before you order. Always cut a test pair first and check the joint.
Our published application covers Dekton, porcelain and ceramic slabs. For other sintered slab brands, send the slab brand and thickness and trial a sample before you buy in volume.
Send your saw model, blade diameter, required bore, slab material and thickness, cut type and quantity by size. Attach a blade label for a replacement order or a mounting drawing for a custom configuration. Ask for the proposed blade specification, sample schedule and batch price in the same inquiry.
Request an SDBA Sample or Quote
Corediam Introduction
Corediam Tools Co., Ltd., as a high-tech enterprise, concentrates on researching & developing manufacturing and marketing diamond tools industry. We have the most extensive, innovative and powerful range of diamond tools for construction, stone and DIY markets. Corediam strives to be the leading professional supplier in the world through technology innovation.
Why choose Corediam Tools ?
1. 20+ experiences in diamond tool industry
2. Exported to 50+ countries worldwide,Understanding different market demands
3. Fast Response with 8 hours
4. OEM & Branding Support
5. 15+ international industry exhibitions,Face-to-face communication
6. 10+ Certificates and patents

Inquiry
Message Board-